Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8858878
- Product Categories
- Friendly Links
Information Name: | Lamps integrated torque tester |
Published: | 2012-04-18 |
Validity: | 30 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | (Precision automatic type) lamps torque testing device can meet the following three functions; 1) GB7000.1-2007-4.14.2 half lamps contacts bending moment test 2) GB7000.1-2007-4.12.5 threaded gland test 3) GB7000.1-2007-4.14.1 terms of test B rigid suspension lamps torque test 4) GB7000.1-2007-4.4.4-ii terms ii screw lampholders and bayonet holder mounting bracket bending moment test Product Description: This device complies with GB7000.1-2002/IEC60598-1: 1999 4.14.1 terms of test B standard for the assessment rigid suspension lamps mechanical suspension whether there is sufficient safety factor. Technical parameters: 1, turn the wheel - plate carrier can clockwise and reverse when the direction of suspension 2 5N of weight imposed torque force, lasted 1min, Test, lamps in both directions can not exceed the fixed component to reverse a turn. 2, you can manually adjust the lamp height and central location to accommodate the different types of steel hanging lamps. Pointer lamps reverse angle instrument. Imports of aluminum extrusions based architecture, the appearance of simple, easy to operate. 1) semi-lamp contact bending moment test This device is mainly used for the detection of a screw or bayonet holder semi-lamps, its quality and the effective moment is more than the maximum given in the following table Value. Bending moment is in the fully inserted position, as opposed to semi-lamps with Edison screw lampholders center contacts or point of contact with the tip of the bayonet holder column Said. Lampholders lamps Maximum bending moment of maximum quality E14 and B15 1.8kg 0.9Nm E27 and B22 2.0kg 1.8Nm 2), thread sealing gland test: torque test for thread sealing gland on a variety of lamps, the device complies with GB7000.1-2002 terms of standard 4.12.5 requires examination thread sealing gland and mechanical strength of the lamps. 3), rigid suspension lamps torque test Comply with GB7000.1-2002/IEC60598-1: 1999 Terms 4.14.1 Test B of the standard requirements for the assessment rigid suspension lamps mechanical suspension whether there is sufficient safety factor. Can be cis and the reverse time direction of the suspension. 5N of weight imposed torque force, lasted 1min, test lamps in both directions relative to the fixed component to reverse no more than one turn. 4), Edison screw lampholders or bayonet holder mounting bracket under the following bending moments, lasting 1min ----- E14 and B15 lampholders 1.0nm ----- E26, E27 and B22 lampholders 2.0Nm |
Admin>>>
You are the 7107 visitor
Copyright © GuangDong ICP No. 10089450, Zhongshan endurance Electronic Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 7107 visitor
Copyright © GuangDong ICP No. 10089450, Zhongshan endurance Electronic Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility