Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8858878
- Product Categories
- Friendly Links
Information Name: | Lamps adjustable device testing machine |
Published: | 2012-04-18 |
Validity: | 30 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Basis GB/7000.1-2002 4.14.3 and EN60598-1: 2000 standard Function Description: This device is mainly used to test the adjustment device equipped with a suitable soft rope or cord is constantly bending torsion test; assessment of their conductor fracture number of shares exceeding the prescribed 50%, and the cable insulation can not serious damage. Features: The equipment adopts PLC control and LCD panel operation, the test angle, the speed can be set, the device uses the positioning of optical power, the bending axis of the lamps turn Festival Centre to achieve the same axis of rotation, limit the accuracy and protection, will not be lighting or the test fixture is damaged; during the test, lead fractures lead to power outages, the panel will display the power-off the current number of trials can continue to be completed after the completion of the test equipment, automatic alarm; is a function of stable operation and easy lamp preferred test equipment. Suitable lamps: painting instrument lights, windows spotlights, table lamps, floor lamps and a variety of Floodlights Main technical parameters: A. Number of trials: 0 ~ 999 999 may be located, the number of crank set. Two. Crank speed 0-10 times / min (stepless adjustable) to achieve the angular variation of the situation to ensure that the swing speeds of up to 600 times / hour requirement 3. Swing angle can be arbitrarily set, you can set the range of 0-180 degrees on both sides of the vertical line of 360-degree adjustable 4. Universal fixture ------------------------- 1 set 5 Mitsubishi PLC controller ------------------- 1 set 6. LCD panel ------------------------ 1 set 7. Italy stepper motor ------------------ 1 set 8. Aluminum body 9. Positioning of the lamps (fixtures) three-dimensional adjustable 10. Swing frequency and time display separate 11. Randomly attached to vice lighting fixtures 12. Power outages choose to stop and continue to work in two modes 13. Increase the display object to be tested through power outages (ie, poor contact) the number of display requirements 14. Swing tester pivot center and lamps turn Festival Centre to achieve the same axis of tune-bit display (infrared beam), and with the axis of rotation 15. Accurate limit and protection, will not lamps or test folder governance damage, failure, such as stuck when the alarm 16. Operating current: AC220V 50HZ |
Admin>>>
You are the 7107 visitor
Copyright © GuangDong ICP No. 10089450, Zhongshan endurance Electronic Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 7107 visitor
Copyright © GuangDong ICP No. 10089450, Zhongshan endurance Electronic Equipment Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility